Float Equipment > Flapper U800 Series

Flapper U800 Series Float Equipment

The flapper type float equipment is part of our U800 Float equipment series. This model is certified to API 10F specifications for pressure, temperature and durability.

It will serve as your primary valve after the displacement of cement. It’s designed to withstand extensive wear from heat, pressure, and other abrasive factors that come with cement drilling.

Flapper

Flapper U800 Series

U800 Series Float Shoe

The U800 Series Float Shoe has an aluminum flapper valve designed for use with high concentration of lost circulation material (LCM). This design allows large solids through the valve without clogging the system or flow obstruction. This float shoe is PDC drillable and can be ordered in single or double valve system, as well as multiple guide nose and cementing ports configurations.

The float shoe is designed to withstand high temperature, pressure and abrasive factors from long periods of circulation.

Our U800 Series Float Shoe is certified to API 10F Specifications.

Technical Specifications:

  • Flow Rate: 6 bpm for 12 hours
  • Back Pressure: 3,000 psi
  • Temperature: 300°F
  • Flow Area: 3.14in^2
  • Interior Diameter: 2.00 in

Options:

  • Single or Double Valve
  • Standard Cement round nose
  • Composite or Aluminum nose in the following:
    • Bullet
    • Eccentric
    • Round
    • Tapered
    • Tapered Cut Lip
  • Cementing Ports:
    • Down-Jets
    • Side Ports
    • Up-Jets

Internal components are PDC drillable

Available in sizes from 4½” to 20” in various configurations

REQUEST A QUOTE    CREDIT APPLICATION

U801 Series Float Collar

The U801 Series Float Collar serves as the secondary valve after the displacement of cement. It’s PDC drillable and meets the API 10F specifications. Primarily used as a port of landing for cementing plugs, it’s capable of supporting a wide range of pressures such as the impact pressure that come with the wiper plugs that are pumped through the casing, and then later the flow which comes back up the casing.

During these periods of circulation, these valves will also withstand the range abrasive factors such as drilling fluids and cement slurry mixes.

Our U801 Series Float Collar is certified to API 10F Specifications.

Technical Specifications:

  • Flow Rate: 6 bpm for 12 hours
  • Back Pressure: 3,000 psi
  • Temperature: 300°F
  • Flow Area: 3.14in^2
  • Interior Diameter: 2.00in

Options:

  • Single or Double Valve
  • Ball Deflector
  • Plug Catcher
  • Non-Rotate Plate
  • Orifice Tube for tieback applications

Internal components are PDC drillable.

Available in sizes from 4 ½” to 20” in various configurations.

REQUEST A QUOTE      CREDIT APPLICATION

U800 Series Float Shoe

The U800 Series Float Shoe has an aluminum flapper valve designed for use with high concentration of lost circulation material (LCM). This design allows large solids through the valve without clogging the system or flow obstruction. This float shoe is PDC drillable and can be ordered in single or double valve system, as well as multiple guide nose and cementing ports configurations.

The float shoe is designed to withstand high temperature, pressure and abrasive factors from long periods of circulation.

Our U800 Series Float Shoe is certified to API 10F Specifications.

Technical Specifications:

  • Flow Rate: 6 bpm for 12 hours
  • Back Pressure: 3,000 psi
  • Temperature: 300°F
  • Flow Area: 3.14in^2
  • Interior Diameter: 2.00 in

Options:

  • Single or Double Valve
  • Standard Cement round nose
  • Composite or Aluminum nose in the following:
    • Bullet
    • Eccentric
    • Round
    • Tapered
    • Tapered Cut Lip
  • Cementing Ports:
    • Down-Jets
    • Side Ports
    • Up-Jets

Internal components are PDC drillable

Available in sizes from 4½” to 20” in various configurations

REQUEST A QUOTE

CREDIT APPLICATION

U801 Series Float Collar

The U801 Series Float Collar serves as the secondary valve after the displacement of cement. It’s PDC drillable and meets the API 10F specifications. Primarily used as a port of landing for cementing plugs, it’s capable of supporting a wide range of pressures such as the impact pressure that come with the wiper plugs that are pumped through the casing, and then later the flow which comes back up the casing.

During these periods of circulation, these valves will also withstand the range abrasive factors such as drilling fluids and cement slurry mixes.

Our U801 Series Float Collar is certified to API 10F Specifications.

Technical Specifications:

  • Flow Rate: 6 bpm for 12 hours
  • Back Pressure: 3,000 psi
  • Temperature: 300°F
  • Flow Area: 3.14in^2
  • Interior Diameter: 2.00in

Options:

  • Single or Double Valve
  • Ball Deflector
  • Plug Catcher
  • Non-Rotate Plate
  • Orifice Tube for tieback applications

Internal components are PDC drillable.

Available in sizes from 4 ½” to 20” in various configurations.

REQUEST A QUOTE

CREDIT APPLICATION

N

24 Hour or Less Quotations

N

Proactive Global Reach

Ferro-Tube Oil Tools Co. is a leading manufacturer of Float Equipment and accessories. We provide superior designed equipment to provide optimal performance under any well conditions.

Timer with lines coming from left.

Shorter Production Time

Boxes on shelves.

In-house Inventory

Computer menu with checkmarks.

In-house Testing Facility

"Excellent Service"

"Excellent Service"

Why Ferro-Tube

Ferro-Tube centralizers and accessories can be found in oil and gas wells around the world.

Flapper

Our number one goal is to exceed our customers’ expectations and provide them with the strongest, most reliable and cost-efficient products in the oil field industry.

We are one of the country’s most respected and reliable suppliers for spiral and straight vane centralizers

Our experienced engineering team is ready to answer all your questions and guide you to the right product for your project.

Ferro-Tube is a family owned manufacturer with a global reach

Contact Us

Engage with our experienced team to learn more about our products.

Call us at
281-379-2995

Or fill out our form below to hear back from us within 24 hours.

Follow Ferro-Tube Oil & Tools